Furnishing kitchen or bathroom are used with a single handle to control the flow of water and control of the mixture rule for years without attention. If it drops or loses, the entire control unit must be replaced.
As with taps stem cells, is the first problem disassembly. Producers tap to hide the screws in mysterious places - beneath the decorative handles or knobs - or exclude it altogether. This tutorial should help you understand how within four types by itselfSingle lever faucets. Once inside, you can see what kind of regulating valve.
It 'important to get original parts, just like every company does. Consult the Internet for the production of the nearest sales office, you drive to a local dealer parts.
Remove the valve carefully, noting how the pieces fit together - and in what order - are sewn together as a help. Sketches can be very useful as a tool for assembly.
The ball 1Tap
Because the round shape of the valve handle suggests, is to control this valve is a ball of brass, with three gates through which water flows when the doors of the seats in the faucet body is centered. Under the tree of the handle is a screw that has to deal with an Allen key to solve off. Do not take the screw out completely, easily lost.
2 The ceramic disc valve cartridge
The screw, which can not handle this situation under thedecorative button where you would expect, he could find. Lift the lever to go as high as you can, it is absorbed by a small screw in the handle. But the steering is now only partially excavated, the body must also remove the chrome cover. To do this, remove the screw holding the pop-up drain rod under the sink (first sign of the shaft with a felt pen so you can make a connection at the same point). Then unscrew the two screws on the bottom of the valve andCover up the body. Newer versions have a slot in the bolt handle and a chrome ring that screwed into the cartridge for easier access.
The stripping cock 3
So called because hot and cold water inlets in each case, a valve, which tips the lever forward, the water moves through the spout, this faucet will be common in kitchens, even if he has not forgiven. To draw water, rotate the nozzle ring with a key anti-clockwise (if you use a tubeKey, make sure that the key to the jaws are covered with duct tape) can be lifted up to the outlet. Then pry the chrome plated body with a screwdriver and lift.
4 The sleeve-type cartridge valve
The screw in the lid of the handle of the faucet is shown in plain sight, but in more recent models, has a decorative button that must be stopped hiding. The handle of the tap is increased to activate the water and cuts off. Inside the lid of the movement of the lever is moved oneCartridge up and down the water and out. An old model of this valve has a mounting bracket to the outer side of the handle to be pulled out of the disassembly.
